• GX120 & HP200
  • GX160 & HP300
  • GX160 & HP350
  • GX200 & HP400
  • GX270 & HP500
  • GXH50 & HP100


Engine & Pump Assemblies

Outstanding dredge vacuum and long life

We manufacture one of the most comprehensive series of pumps in the small dredge industry today. These are high performance centrifugal pumps designed specifically for operating our dredges and dual-purpose machines. First, they are cast in the US from high quality aluminum then heat treated to a "T-6" hardness for years of service. Each part is then machined on computer controlled equipment to maintain the exact tolerances required for optimum performance. Our pumps are 5-vane and 6-vane "aggressive bite" impellers with large intake throats to provide high volume with working pressure greater than normally found on pumps of this type. They are hand-assembled using US made seals and grade 8 hardware. The quality and performance of these units, when coupled with our efficient jetting systems, offers outstanding dredge vacuum, very little required service, and long life.

Honda GXH50 & HP100 Pump ($810)

This pump bolts directly to the 2.5 horsepower 4-cycle engine. It has a 1.5” intake and a 1.25” discharge. It is used on our 2” dredge and combo.

Honda GX120 & HP200 Pump ($1035)

One of the first 3-4 horsepower size pumps engineered to allow for the use of a diving compressor. This pump has a 2” intake and a 1.25” discharge. This is the standard pump on the 2.5” dredge and combo.

Honda GX160 & HP300 Pump ($1110)

Designed specifically for the great water pressure required to successfully operate our 3” combo as a highbanker. It is equipped with a 2.5” intake and a 1.5” discharge.

Honda GX160 & HP350 Pump ($1150)

This is our standard pump for use on our 4” dredge and twin engine 5” dredges. It has a 2.5” intake and a 2” discharge. It is one of the most powerful pumps available for 5 to 5.5 horsepower engines.

Honda GX200 & HP400 Pump ($1310)

Currently the only pump designed specifically for the new 6.5 horsepower engines. It has a 3” intake and a 2” discharge. It is available as an upgrade on our 4” dredge and twin engine 5” dredge.

Honda GX270 & HP500 Pump ($1575)

Honda GX630 & HP800 Pump ($3270)

This is our largest pump as of this printing. It has a 3” intake and a 2” discharge. It develops considerably more pressure and volume than the other 8 to 9 horsepower pumps. This is the standard pump on our single engine 5” dredge and twin engine 6” dredge.

Engine / Pump / Air Compressor Assemblies

GX120, HP200, & T-80 ($1360)

GX160, HP300, & T-80 ($1440)

GX160, HP350, & T-80 ($1465)

GX200, HP400, & T-80 ($1640)

GX200, HP400, & PCA10 ($2085)

GX270, HP500, & T-80 ($1870)

GX270, HP500, & PCA10 ($2350)

GX630, HP800, & PCA10 ($4035)